Run this command to install the SDK:

npm install cloudmersive-convert-api-client --save


Or add this snippet to your package.json:

  "dependencies": {
    "cloudmersive-convert-api-client": "^2.6.3"
  }


var CloudmersiveConvertApiClient = require('cloudmersive-convert-api-client');
var defaultClient = CloudmersiveConvertApiClient.ApiClient.instance;

// Configure API key authorization: Apikey
var Apikey = defaultClient.authentications['Apikey'];
Apikey.apiKey = 'YOUR API KEY';



var apiInstance = new CloudmersiveConvertApiClient.ConvertImageApi();

var format1 = "format1_example"; // String | Input file format as a 3+ letter file extension.  You can also provide UNKNOWN for unknown file formats. Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV

var format2 = "format2_example"; // String | Output (convert to this format) file format as a 3+ letter file extension.  Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV

var inputFile = Buffer.from(fs.readFileSync("C:\\temp\\inputfile").buffer); // File | Input file to perform the operation on.


var callback = function(error, data, response) {
  if (error) {
    console.error(error);
  } else {
    console.log('API called successfully. Returned data: ' + data);
  }
};
apiInstance.convertImageImageFormatConvert(format1, format2, inputFile, callback);

Run this command to install the SDK:

pip install cloudmersive-convert-api-client


from __future__ import print_function
import time
import cloudmersive_convert_api_client
from cloudmersive_convert_api_client.rest import ApiException
from pprint import pprint

# Configure API key authorization: Apikey
configuration = cloudmersive_convert_api_client.Configuration()
configuration.api_key['Apikey'] = 'YOUR_API_KEY'



# create an instance of the API class
api_instance = cloudmersive_convert_api_client.ConvertImageApi(cloudmersive_convert_api_client.ApiClient(configuration))
format1 = 'format1_example' # str | Input file format as a 3+ letter file extension.  You can also provide UNKNOWN for unknown file formats. Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
format2 = 'format2_example' # str | Output (convert to this format) file format as a 3+ letter file extension.  Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
input_file = '/path/to/inputfile' # file | Input file to perform the operation on.

try:
    # Image format conversion
    api_response = api_instance.convert_image_image_format_convert(format1, format2, input_file)
    pprint(api_response)
except ApiException as e:
    print("Exception when calling ConvertImageApi->convert_image_image_format_convert: %s\n" % e)

Run this command to install the SDK:

Install-Package Cloudmersive.APIClient.NET.DocumentAndDataConvert -Version 3.4.2


using System;
using System.Diagnostics;
using Cloudmersive.APIClient.NET.DocumentAndDataConvert.Api;
using Cloudmersive.APIClient.NET.DocumentAndDataConvert.Client;
using Cloudmersive.APIClient.NET.DocumentAndDataConvert.Model;

namespace Example
{
    public class ConvertImageImageFormatConvertExample
    {
        public void main()
        {
            // Configure API key authorization: Apikey
            Configuration.Default.AddApiKey("Apikey", "YOUR_API_KEY");
            
            

            var apiInstance = new ConvertImageApi();
            var format1 = format1_example;  // string | Input file format as a 3+ letter file extension.  You can also provide UNKNOWN for unknown file formats. Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
            var format2 = format2_example;  // string | Output (convert to this format) file format as a 3+ letter file extension.  Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
            var inputFile = new System.IO.FileStream("C:\\temp\\inputfile", System.IO.FileMode.Open); // System.IO.Stream | Input file to perform the operation on.

            try
            {
                // Image format conversion
                byte[] result = apiInstance.ConvertImageImageFormatConvert(format1, format2, inputFile);
                Debug.WriteLine(result);
            }
            catch (Exception e)
            {
                Debug.Print("Exception when calling ConvertImageApi.ConvertImageImageFormatConvert: " + e.Message );
            }
        }
    }
}

To install with Maven, add a reference to the repository in pom.xml:

<repositories>
    <repository>
        <id>jitpack.io</id>
        <url>https://jitpack.io</url>
    </repository>
</repositories>


And add a reference to the dependency in pom.xml:

<dependencies>
<dependency>
    <groupId>com.github.Cloudmersive</groupId>
    <artifactId>Cloudmersive.APIClient.Java</artifactId>
    <version>v4.25</version>
</dependency>
</dependencies>


To install with Gradle, add it in your root build.gradle at the end of repositories:

allprojects {
	repositories {
		...
		maven { url 'https://jitpack.io' }
	}
}


And add the dependency in build.gradle:

dependencies {
        implementation 'com.github.Cloudmersive:Cloudmersive.APIClient.Java:v4.25'
}


// Import classes:
//import com.cloudmersive.client.invoker.ApiClient;
//import com.cloudmersive.client.invoker.ApiException;
//import com.cloudmersive.client.invoker.Configuration;
//import com.cloudmersive.client.invoker.auth.*;
//import com.cloudmersive.client.ConvertImageApi;

ApiClient defaultClient = Configuration.getDefaultApiClient();

// Configure API key authorization: Apikey
ApiKeyAuth Apikey = (ApiKeyAuth) defaultClient.getAuthentication("Apikey");
Apikey.setApiKey("YOUR API KEY");
// Uncomment the following line to set a prefix for the API key, e.g. "Token" (defaults to null)
//Apikey.setApiKeyPrefix("Token");

ConvertImageApi apiInstance = new ConvertImageApi();
String format1 = "format1_example"; // String | Input file format as a 3+ letter file extension.  You can also provide UNKNOWN for unknown file formats. Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
String format2 = "format2_example"; // String | Output (convert to this format) file format as a 3+ letter file extension.  Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
File inputFile = new File("/path/to/inputfile"); // File | Input file to perform the operation on.
try {
    byte[] result = apiInstance.convertImageImageFormatConvert(format1, format2, inputFile);
    System.out.println(result);
} catch (ApiException e) {
    System.err.println("Exception when calling ConvertImageApi#convertImageImageFormatConvert");
    e.printStackTrace();
}

Run this command to install the SDK:

composer require cloudmersive/cloudmersive_document_convert_api_client


<?php
require_once(__DIR__ . '/vendor/autoload.php');

// Configure API key authorization: Apikey
$config = Swagger\Client\Configuration::getDefaultConfiguration()->setApiKey('Apikey', 'YOUR_API_KEY');



$apiInstance = new Swagger\Client\Api\ConvertImageApi(
    
    
    new GuzzleHttp\Client(),
    $config
);
$format1 = "format1_example"; // string | Input file format as a 3+ letter file extension.  You can also provide UNKNOWN for unknown file formats. Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
$format2 = "format2_example"; // string | Output (convert to this format) file format as a 3+ letter file extension.  Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
$input_file = "/path/to/inputfile"; // \SplFileObject | Input file to perform the operation on.

try {
    $result = $apiInstance->convertImageImageFormatConvert($format1, $format2, $input_file);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling ConvertImageApi->convertImageImageFormatConvert: ', $e->getMessage(), PHP_EOL;
}
?>

Add the Objective-C client to your Podfile:

pod 'CloudmersiveDocumentAndDataConvertApiClient', '~> 1.0'


CMDefaultConfiguration *apiConfig = [CMDefaultConfiguration sharedConfig];

// Configure API key authorization: (authentication scheme: Apikey)
[apiConfig setApiKey:@"YOUR_API_KEY" forApiKeyIdentifier:@"Apikey"];




NSString* format1 = @"format1_example"; // Input file format as a 3+ letter file extension.  You can also provide UNKNOWN for unknown file formats. Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
NSString* format2 = @"format2_example"; // Output (convert to this format) file format as a 3+ letter file extension.  Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV
NSURL* inputFile = [NSURL fileURLWithPath:@"/path/to/file"]; // Input file to perform the operation on.

CMConvertImageApi*apiInstance = [[CMConvertImageApi alloc] init];

// Image format conversion
[apiInstance convertImageImageFormatConvertWithFormat1:format1
              format2:format2
              inputFile:inputFile
          completionHandler: ^(NSData* output, NSError* error) {
                        if (output) {
                            NSLog(@"%@", output);
                        }
                        if (error) {
                            NSLog(@"Error calling CMConvertImageApi->convertImageImageFormatConvert: %@", error);
                        }
                    }];

Add the Ruby client to your Gemfile:

gem 'cloudmersive-convert-api-client', '~> 2.1.6'


# load the gem
require 'cloudmersive-convert-api-client'
# setup authorization
CloudmersiveConvertApiClient.configure do |config|
  # Configure API key authorization: Apikey
  config.api_key['Apikey'] = 'YOUR API KEY'
  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
  #config.api_key_prefix['Apikey'] = 'Bearer'
end

api_instance = CloudmersiveConvertApiClient::ConvertImageApi.new

format1 = 'format1_example' # String | Input file format as a 3+ letter file extension.  You can also provide UNKNOWN for unknown file formats. Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV

format2 = 'format2_example' # String | Output (convert to this format) file format as a 3+ letter file extension.  Supported formats include AAI, ART, ARW, AVS, BPG, BMP, BMP2, BMP3, BRF, CALS, CGM, CIN, CMYK, CMYKA, CR2, CRW, CUR, CUT, DCM, DCR, DCX, DDS, DIB, DJVU, DNG, DOT, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EXR, FAX, FIG, FITS, FPX, GIF, GPLT, GRAY, HDR, HEIC, HPGL, HRZ, ICO, ISOBRL, ISBRL6, JBIG, JNG, JP2, JPT, J2C, J2K, JPEG/JPG, JXR, MAT, MONO, MNG, M2V, MRW, MTV, NEF, ORF, OTB, P7, PALM, PAM, PBM, PCD, PCDS, PCL, PCX, PDF, PEF, PES, PFA, PFB, PFM, PGM, PICON, PICT, PIX, PNG, PNG8, PNG00, PNG24, PNG32, PNG48, PNG64, PNM, PPM, PSB, PSD, PTIF, PWB, RAD, RAF, RGB, RGBA, RGF, RLA, RLE, SCT, SFW, SGI, SID, SUN, SVG, TGA, TIFF, TIM, UIL, VIFF, VICAR, VBMP, WDP, WEBP, WPG, X, XBM, XCF, XPM, XWD, X3F, YCbCr, YCbCrA, YUV

input_file = File.new('/path/to/inputfile') # File | Input file to perform the operation on.


begin
  #Image format conversion
  result = api_instance.convert_image_image_format_convert(format1, format2, input_file)
  p result
rescue CloudmersiveConvertApiClient::ApiError => e
  puts "Exception when calling ConvertImageApi->convert_image_image_format_convert: #{e}"
end

Download and copy the /client folder into your Apex project:

Download Apex Client

SwagConvertImageApi api = new SwagConvertImageApi();
SwagClient client = api.getClient();

// Configure API key authorization: Apikey
ApiKeyAuth Apikey = (ApiKeyAuth) client.getAuthentication('Apikey');
Apikey.setApiKey('YOUR API KEY');

Map<String, Object> params = new Map<String, Object>{
    'format1' => 'format1_example',
    'format2' => 'format2_example',
    'inputFile' => Blob.valueOf('Sample text file\nContents')
};

try {
    // cross your fingers
    Blob result = api.convertImageImageFormatConvert(params);
    System.debug(result);
} catch (Swagger.ApiException e) {
    // ...handle your exceptions
}

Install libcurl in your C/C++ project:

libcurl/7.75.0
CURL *curl;
CURLcode res;
curl = curl_easy_init();
if(curl) {
     curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "POST");
     curl_easy_setopt(curl, CURLOPT_URL, "https://api.cloudmersive.com/convert/image/%3Cstring%3E/to/%3Cstring%3E");
     curl_easy_setopt(curl, CURLOPT_FOLLOWLOCATION, 1L);
     curl_easy_setopt(curl, CURLOPT_DEFAULT_PROTOCOL, "https");
     struct curl_slist *headers = NULL;
     headers = curl_slist_append(headers, "Content-Type: multipart/form-data");
     headers = curl_slist_append(headers, "Apikey: YOUR-API-KEY-HERE");
     curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headers);
     curl_mime *mime;
     curl_mimepart *part;
     mime = curl_mime_init(curl);
     part = curl_mime_addpart(mime);
     curl_mime_name(part, "inputFile");
     curl_mime_filedata(part, "/path/to/file");
     curl_easy_setopt(curl, CURLOPT_MIMEPOST, mime);
     res = curl_easy_perform(curl);
     curl_mime_free(mime);
}
curl_easy_cleanup(curl);
curl --location --request POST 'https://api.cloudmersive.com/convert/image/<string>/to/<string>' \
--header 'Content-Type: multipart/form-data' \
--header 'Apikey: YOUR-API-KEY-HERE' \
--form 'inputFile=@"/path/to/file"'
import Foundation
#if canImport(FoundationNetworking)
import FoundationNetworking
#endif

var semaphore = DispatchSemaphore (value: 0)

let parameters = [
     [
          "key": "inputFile",
          "src": "/path/to/file",
          "type": "file"
     ]] as [[String : Any]]

let boundary = "Boundary-\(UUID().uuidString)"
var body = ""
var error: Error? = nil
for param in parameters {
     if param["disabled"] == nil {
          let paramName = param["key"]!
          body += "--\(boundary)\r\n"
          body += "Content-Disposition:form-data; name=\"\(paramName)\""
          if param["contentType"] != nil {
               body += "\r\nContent-Type: \(param["contentType"] as! String)"
          }
          let paramType = param["type"] as! String
          if paramType == "text" {
               let paramValue = param["value"] as! String
               body += "\r\n\r\n\(paramValue)\r\n"
          } else {
               let paramSrc = param["src"] as! String
               let fileData = try NSData(contentsOfFile:paramSrc, options:[]) as Data
               let fileContent = String(data: fileData, encoding: .utf8)!
               body += "; filename=\"\(paramSrc)\"\r\n"
                 + "Content-Type: \"content-type header\"\r\n\r\n\(fileContent)\r\n"
          }
     }
}
body += "--\(boundary)--\r\n";
let postData = body.data(using: .utf8)

var request = URLRequest(url: URL(string: "https://api.cloudmersive.com/convert/image/<string>/to/<string>")!,timeoutInterval: Double.infinity)
request.addValue("multipart/form-data", forHTTPHeaderField: "Content-Type")
request.addValue("YOUR-API-KEY-HERE", forHTTPHeaderField: "Apikey")
request.addValue("multipart/form-data; boundary=\(boundary)", forHTTPHeaderField: "Content-Type")

request.httpMethod = "POST"
request.httpBody = postData

let task = URLSession.shared.dataTask(with: request) { data, response, error in 
     guard let data = data else {
          print(String(describing: error))
          semaphore.signal()
          return
     }
     print(String(data: data, encoding: .utf8)!)
     semaphore.signal()
}

task.resume()
semaphore.wait()

This code snippet uses the built-in JavaScript XHR request capability

var data = new FormData();
data.append("inputFile", fileInput.files[0], "file");
 
var xhr = new XMLHttpRequest();
xhr.withCredentials = true;

xhr.addEventListener("readystatechange", function() {
     if(this.readyState === 4) {
          console.log(this.responseText);
     }
});

xhr.open("POST", "https://api.cloudmersive.com/convert/image/%3Cstring%3E/to/%3Cstring%3E");

xhr.setRequestHeader("Apikey", "YOUR-API-KEY-HERE");

xhr.send(data);
package main

import (
     "fmt"
     "bytes"
     "mime/multipart"
     "os"
     "path/filepath"
     "io"
     "net/http"
     "io/ioutil"
)

func main() {

     url := "https://api.cloudmersive.com/convert/image/%3Cstring%3E/to/%3Cstring%3E"
     method := "POST"

     payload := &bytes.Buffer{}
     writer := multipart.NewWriter(payload)
     file, errFile1 := os.Open("/path/to/file")
     defer file.Close()
     part1,
         errFile1 := writer.CreateFormFile("inputFile",filepath.Base("/path/to/file"))
     _, errFile1 = io.Copy(part1, file)
     if errFile1 != nil {
          fmt.Println(errFile1)
          return
     }
     err := writer.Close()
     if err != nil {
          fmt.Println(err)
          return
     }


     client := &http.Client {
     }
     req, err := http.NewRequest(method, url, payload)

     if err != nil {
          fmt.Println(err)
          return
     }
     req.Header.Add("Content-Type", "multipart/form-data")
     req.Header.Add("Apikey", "YOUR-API-KEY-HERE")

     req.Header.Set("Content-Type", writer.FormDataContentType())
     res, err := client.Do(req)
     if err != nil {
          fmt.Println(err)
          return
     }
     defer res.Body.Close()

     body, err := ioutil.ReadAll(res.Body)
     if err != nil {
          fmt.Println(err)
          return
     }
     fmt.Println(string(body))
}

Walkthrough Video